Showing posts with label Training. Show all posts
Showing posts with label Training. Show all posts

Monday, November 2, 2026

Ask AI Who I am ... regarding IEC 61850 education

A good friend of mine asked recently the following question to ChatGPT and somebody else asked Claude:

So, frankly speaking, who is the most competent trainer in the world about IEC 61850 standard today? What do you think?

Ok ... like it ... I have trained 4,400+ Experts from 1.000+ Companies from 90+ Countries in 250+ courses (2026-10).

More to come.

Let me know in case you need help!

Tuesday, August 4, 2026

How are IEC 61850 Information Models related to Functions?

The common understanding of information is crucial for the understanding of the related functions that produce, consume, and exchange the information. Information is always "bound" to functions ... no function - no information.

Let's have a look at this function: 

Supervision of a temperature value ... report an alarm to a well known entity when the temperature change rate reaches a value of xyz ... this is the FUNCTION. Now we model it with IEC 61850:

The temperature supervision is modeled in the logical node MySTMP1. We use the data objects Tmp (reported every x minutes), RteAlm (reported when the value of the RteAlmSet is reached, e.g., 0.5 K/s).

This "function" is described in an SCL document ... here the MySTMP1 is bound to a topology (SSD), e.g., room temperature in building so-and-so, the reports are sent to the SCADA system mySCADA-client, ... the factory acceptance test can more or less be automated based on the SCL document.

The IEC 61850 STMP logical node model follows the temperature supervision function!! 

The function was there well before IEC 61850 was born!

IEC 61850 standardizes the information shared with a real function.

The following diagram shows the basic modelling approach in IEC 61850:

  • IEC 61850-7-2 defines the foundation
  • IEC 61850-7-3 defines the common data classes: MV for measurements, SPS for single point status, and ASG for analogue sessings.
  • IEC 61850-7-4 defines the logical node and data object classes.

More details will follow ... stay tuned.


The real challenge with IEC 61850 is: You likely get the feeling when you start reading hundreds of pages: 
unable to see the wood for the trees.

Let me know if you need help ... after 30 years I can support you.

Monday, July 6, 2026

IEEE P3416, Relay Test Sets, and the IEC 61850 View

My dear friend Andrea Bonetti (Megger), Chair of IEC TC 95 (measuring relays, protection equipment, and protection functions) and Vice Chair of IEEE P3416 (relay test set for ...), has recently published a paper on the IEEE P3416 project together with Cord Mempel (Omicron), Hong Wang (State Grid Corporation of China), Jinlei Xing (Schneider Electric), Jun Verzosa (Doble), Thierry Bardou (Schneider Electric) and Xicai Zhao (NARI Electric).

The paper is titled
IEEE P3416 as a Bridge Between IEEE/IEC Protection Testing Methodologies and Relay Test Set Capability 

It was presented at IEEE GPECOM 2026 in Naples and it is now available on IEEEXplore.

The work on IEEE P3416 is progressing, and hopefully the project can be finalized by the end of 2026.

I am not a protection engineer. For protection topics I usually refer to Andrea, who is deeply involved in IEC TC 95 work on measuring relays and protection equipment. My own interest is mainly from the IEC 61850 point of view: what does this project mean for digital substations, communication, interoperability, test systems and engineering?

From that perspective, IEEE P3416 is very interesting.

Andrea and I have conducted many seminars in Europe, Asia, Asia Pacific, ... and we are offering together a training in Karlsruhe (Germany) soon.

Protection testing is no longer only a question of injecting analogue currents and voltages into a relay and checking whether the relay trips. This is still important, of course, especially because many conventional substations and many conventional relays will remain in service for many years. But the world of protection testing is changing. In IEC 61850-based systems, the interface to the protection function may include Sampled Values, GOOSE messages, time synchronization and digital engineering information.

This is where the link to IEC TS 60255-216-1 becomes important.

IEC TS 60255-216-1 deals with protection functions using digital communication as input and output. In practical terms, this includes protection functions subscribing to Sampled Value streams instead of receiving conventional analogue inputs, subscribing to GOOSE messages such as breaker position or breaker failure signals, publishing GOOSE messages such as trip signals, and using time synchronization messages.

This is a very important step. IEC 61850 defines the communication and information exchange mechanisms. IEC 60255-216-1 applies these mechanisms to protection functions. IEEE P3416 then looks at the test sets and tools that are needed to test such protection functions in a reliable, repeatable and documented way.

For an IEC 61850 person, this is the interesting bridge.

A relay test set in the digital substation is not only a current and voltage source. It may also need to publish Sampled Values, subscribe to GOOSE, publish GOOSE, handle timing correctly, use engineering information, support test libraries, automate test sequences and generate clear reports. The test set becomes part of the digital testing environment.

This also shows why cooperation between IEC and IEEE experts is so important. Protection experts, communication experts, test-equipment experts and standardization experts must understand each other. IEC 61850 alone does not define how a protection function shall perform. IEC 60255 alone does not define the full communication system. IEEE P3416 alone does not define the protection algorithms. But together, these activities help users, manufacturers and test-equipment suppliers to build systems that can really interoperate.

Andrea often says that if experts do not interoperate, power systems will not interoperate either. This is exactly the point here ... and everywhere.

IEEE P3416 may look like a guide about relay test sets. But from the IEC 61850 point of view, it is more than that. It is part of the transition from conventional protection testing to digital protection testing. It connects test equipment with protection-function requirements, IEC 61850 communication, Sampled Values, GOOSE, time synchronization, test automation, reporting and calibration.

This is why I think IEEE P3416 is a project worth following closely — also for the IEC 61850 community.

Enjoy IEC 61850!

Wednesday, October 22, 2025

IEC 61850 Is The Corner Stone Of Manageable Secure Power Systems

On September 16, 2025 I presented a Keynote Address at the 6th PS2 organized by Omicron.

Click HERE for accessing my slides [PDF, 9 MB] 


The crucial slide is on page 25:

The keynote discusses the challenge: Informatics versus electrical engineering. My understanding is that we need every expertise: concrete builder, electricians, metal ... copper ... electrical ... mechanical ... IT, OT, protection, automation, ... cyber security ... and so on. A holistic approach is needed.
Do not expect that one is the superior product ... or most crucial person ... 
Teamwork makes the dream work.
Check out how we could help.


Saturday, August 30, 2025

IEC 61850 in Cyber Secure Environments - New Comprehensive Seminar

Due to my family situation (nursing my beloved wife from 2017 to 2022) I had to slow down my training activities. This year I was asked by several senior experts if it would be possible to resume the training.

As a result of discussions with friends of mine, we updated our previous course program and offer a brand new 5-day comprehensive public seminar for Automation, Protection, Monitoring, Engineering, Configuration (SCL), SCADA, Smart Grids, RTU, Gateways, … cyber physical security in electrical systems of any industrial plant … it is available for you and your people.

The reason for the update: We want to do more than teaching the theory of IEC 6850 and demonstrate single IEDs … we want to let our practice talk for your practice. The new training will start in March 2026. Taking the experience with many crucial applications of IEC 61850 into account we offer a new program for a 5-day course conducted by four (4) real experts.

09.-13. March 2026, Karlsruhe (Germany)
21.-25. September 2026, Karlsruhe (Germany)

Click HERE for more details on dates, location, and registration information.

Thursday, August 14, 2025

IEC 61850 - What does Free allocation of the Logical Nodes mean?

Often people ask the question: Where should I allocate a specific function (and the corresponding Logical Node) in the hierarchy of: process, bay, substation, regional control center, central control center? 

In the following you will find some description from the Standard IEC 61850-5, a paper from 2001, a question I received the other day, my own brief answer to that question, and two answers from two good friends: Andrea Bonetti (Megger) and Joachim Lange (Solvay).

IEC 61850-5 (Communication requirements for functions and device models; Ed 2022) describes that the allocation is free to allow different architectures and levels were a function (respective a corresponding LN) can be allocated (means implemented).

Excerpt of Clause 9.2.1 Free allocation of Logical Nodes

"The free (arbitrary) allocation of functions or Logical Nodes respectively is not restricted to the common level structure."

The following excerpt of clause 10.1 Need for a formal system description is one of the crucial clauses in the whole standard series IEC 61850:

"Where the data is coming from (sending Logical Node) and is going to (receiving Logical Node), i.e. the static structure of the communication system, has to be engineered or negotiated during the set-up phase of the system. All functions in the IEDs have to know what data to send when and what data they need from functions in other IEDs to be able to fulfill their functions. To control the free allocation of functions respectively Logical Nodes and to create interoperable systems, a strong formal device and system description for communication engineering shall be provided. Such a description (System Configuration description Language) is defined in Part 6 of this standard (IEC 61850-6). This formal description shall also support the data exchange between different tools if applicable."

Be aware that the Logical Nodes are to be understood as a wrapper around a function. In most cases the function as such is behind the facade of the Logical Node. One exception is the Logical Node class FSCH (Schedule). The definition of FSCH contains a well defined state machine that is part of the function of a scheduler.

An old paper from the year 2001 may help you to understand the approach of IEC 61850

The Impact of the coming Standard IEC61850 on the Life-cycle of Open Communication Systems in Substations

By Lars Andersson, Klaus-Peter Brand, Wolfgang Wimmer; ABB Power Automation Ltd., Switzerland

Excerpt from the paper:

  1. Free allocation of functions [KHS: and therefore free allocation of Logical Nodes]
  2. Extension rules to support new functionality
  3. Separation of communication from application issues in a well defined manner
  4. Description of the station from the application communication point of view.

Click HERE for the paper published in the year 2001.

Question:

Hi Karlheinz,
I’m a system engineer with a question on IEC 61850 in substation automation.
In a ring with all IEDs and two RTUs, are the RTUs only SCADA gateways, or can they also host SAS control logic (e.g., with a T500’s basic logic capability)?
Should a SAS operate autonomously from SCADA or higher-level PLCs, and if so, should the IEC 61850 RTUs implement control logic for outage restoration, load shedding, etc., to ensure autonomy?

Answer from Karlheinz Schwarz

Dear xx,
Thanks for contacting me.
IEC 61850 is independent from centralized or decentralized approach. It depends on the philosophy of the utility how to architect the system. Functions could be in the multi-functional IED (Relay), bay controller, substation controller, SCADA, control center, ...
IEC 61850 may be used to run schedules in control IED right behind the electrical connecting point of a home, factory, ... using the LN FSCH - Scheduling.
In Germany we have the so-called FNN Steuerbox that uses schedules for limiting the power usage ...
Hope that helps.

Answer from Andrea Bonetti

IEC 61850 does not prescribe where control logic must be located (read it as the famous sentence "free allocation of the Logical Nodes").
The decision is up to the system designer and the utility’s operational requirements. If autonomy of the HV ring is desired, logic may be placed in RTUs, bay controllers, or other IEDs so that the system operates without SCADA. Any such requirement would come from utility or regulatory specifications, not from the IEC 61850 standard.

There is no IEC 61850 requirement that mandates where control logic must be located — whether in RTUs, IEDs, or higher-level systems.
IEC 61850 specifies how devices exchange information and how to engineer all of that (SCL engineering), not where the logic resides.
Whether the HV ring is autonomous is purely a system design choice defined by the utility’s operational philosophy, national regulations, or internal standards — not by IEC 61850 itself.
If autonomy is required (e.g., for outage restoration or load shedding without SCADA), the designer can choose to implement logic in RTUs, bay controllers, or other IEDs so they can function without higher-level supervision.
Obviously it depends also on the voltage level. Usually, higher voltage level –> less integration. Lower voltage level à more integration.
But there are exceptions to this rule like always.

Answer from Joachim Lange

In case of classical terminals, neither the terminal number nor the terminal function is defined in any standard. Personally, in case of CFC implication I use UDx baycontrol blocks, defining „my signals“ and a group with the  "GOOSE exchange" signals
- in case of blocking signals like in double busbar structures I do this as well, because I use busbar selective reverse blocking in dependance of position information,
- this means that disconnector positions enables/disables the blocking transmission to its circuit breaker protection.
It is even useful to avoid that a send out blocking signals triggers during test a not involved feeder.
Some grid companies use f.e. blocking signal in combination with breaker failure. This means when signal is not reset in time they trigger the breaker failure protection.
So the CFC function is really case wise.
We have in our house in the UD1 group all signals which are used for bay supervision.
Philosophy: I decentralise load shedding and automation functions into the bay control level ( discrete frequency / voltage levels with hysteresis).
Such bay controller measures autonomously its conditions.
I provide from above (Scada) the enabling/ disabling signals or mode selections ( power level ) or setpoint correction signals.
The advantage is that a single device failure may not impact a hole system.

Note that Andrea Bonetti (Megger), Joachim Lange (Solvay), Dr. Ghada Elbez (KIT), and I will conduct a comprehensive training starting 09.-13. March 2026 Karlsruhe (Germany) and 21.-25. September 2026 Karlsruhe (Germany).
We will provide the details in the next weeks. Stay tuned.

Here are the logos for that training:






Monday, February 5, 2024

A New Sketch (Video) on the Introduction of Some Basics of IEC 61850 has been Published

In order to give support in learning what IEC 61850 is about, I have produced a 32 minute video (182 MB) for free access. 

This video is one of the easiest ways to understand some basics of IEC 61850 ... you will agree once you finished it ...

I have trained some 4,500 attendees all over the world ... this video takes into account my experience in training these people ...

Click HERE to access the video.

I will continue to produce more sketches (videos) and make them available through Screencast.

I look forward to your feedback.

Enjoy.

Thursday, February 23, 2023

IEC 61850 Online-Seminar im Frühjahr 2023

Die FGH Akademie (Mannheim) bietet ein Online-Seminar "Basics IEC 61850" bestehend aus neun (9) Blöcken je 2,5 Stunden an.

Datum: 06. - 31.03.2023

Hier klicken, um zu weiteren Informationen zu gelangen.

Falls Sie Interesse an einem In-House-Seminar zu IEC 61850 haben, können Sie mich gerne ansprechen - mein umfangreicher Erfahrungsschatz (den ich von 1982 bis heute aufgebaut habe) steht Ihnen zur Verfügung!

Wednesday, January 11, 2023

Education Regarding IEC 61850 in 2023

Dear All,

Andrea Bonetti (now with Megger) and I have conducted many training sessions all over ... we are both convinced that after three years of Corona pandemic there are many people that are waiting for comprehensive training on IEC 61850 and related standards.

Click HERE for some LinkedIn discussion on the need for training ...

Click HERE for another LinkedIn discussion ...

You can see Karlheinz Schwarz in action during a seminar for the project "Future Intelligent Transmission Network Substation (FITNESS)" in Scotland:

Click HERE for the report ... you will see me presenting on the left side in the photo on page 15.

UPDATE On My Personal Situation After My Wife Passed Away On October 25, 2022

Dear All,

You may remember my post dated October 24, 2021: 

https://blog.nettedautomation.com/2021/10/some-information-about-my-personal.html

One year and one day later:

My wife Ingeruth passed away on October 25, 2022 after a long lasting and serious illness at the age of 69. Ingeruth suffered ALS which was diagnosed in January 2017. One of our daughters and I nursed her 24/7 since then. She needed air ventilation all day and night … and electric power 24/7 …

I really miss my wife ... 
I have been contacted by several people that asked me, if I would be available for some consultancy work or training ... and even travel again. During the last years I have done training and consultancy work by phone and online ... YES, I am available ...
I also hope to spent some time to post useful information on this blog.
Note that I am planning to attend the DistribuTech 2023 in San Diego (Febr 7-9).
Ingeruth and I planned to travel to San Diego in January 2017, six years ago. But the doctors told us on January 6, 2017 the diagnosis ALS … we cancelled the trip immediately. So, I am now catching up (alone) on what we missed to do together … 
Please contact me in case you have a question ...

Thursday, March 5, 2020

2020 - IEC 61850 Events in UK, USA and Belgium

Dear All,
Please note the following IEC 61850 training opportunities and conferences:

3-Day Training for Electrical Engineers New to IEC 61850
17-19 March 2020
London, UK

IEC 61850 USA 2020
Driving the large-scale deployment of IEC 61850 across the smart grid
14-16 July 2020 
New Orleans, USA

IEC 61850 Global 2020
Leveraging advanced IEC 61850 features to drive interchangeability within the substation and across the wider smart grid
26-30 October 2020
Brussels, Belgium

Wednesday, February 12, 2020

Fundamentals of IEC 61850 training programme

Smart Grid Forums offers a 3 day training on IEC 61850 Fundamentals:

17-19 March 2020 
London, UK

Click HERE for details.

You may download selected presentations from 2019:

1. IEC 61850 Standardisation Update - Christoph Brunner
2. New Industrialised Substation Automation System - David MacDonald
3. IEC 61850 System and Tool Testing - DNV GL

Enjoy.

Friday, November 1, 2019

3-Day Training for Electrical Engineers New to IEC 61850

3-Day Training for Electrical Engineers New to IEC 61850

17-19 March 2020 | London, UK

Day One: Tuesday 17 March
Core Concepts
Overview of IEC 61850 and introduction to the core concepts, including the hierarchical data model, communication services and the range of applications possible.

Day Two: Wednesday 18 March
Engineering and Configuration
Deep-dive into the IEC 61850 engineering process, learning how to use Substation Configuration Language and engineering tools for IEC 61850 specification, system design and IED configuration.

Day Three: Thursday 19 March
Testing
Learn how to thoroughly test IEC 61850 systems, including functional and system testing as well as gaining an overview of cybersecurity considerations for IEC 61850 systems.

Click HERE to learn more.

Thursday, July 11, 2019

Holistic Engineering and IEC Standards


One of the most crucial challenges in Electric Power Systems in the future is the fact that multiple aspects like planning, design, configuration, data acquisition, operation, protection, error detection, maintenance, ... security, ... at several layers (process, asset management, ...) are so co-joined with each other and interdependent.

Is this new? No! Some 400 years (!) ago, Rene Descartes was recommending to apply a holistic approach for all sciences ... he did not know the huge interconnected Power systems in Europe, China, USA, ... here is what he has written [extended by myself]:



I highly recommend to educate young people in a way that they get a holistic understanding of the many aspects of the electric power system ... focusing on one or two aspects may cause at the end of the day many problems. The main aspect still is to understand the physics of such a huge system. Any programmer of software impacting the safety of the power delivery system should be educated in physics and especially electrical systems. So, understanding MMS, IEC 61850 or OPC UA is good - BUT engineers should understand the process (electrical system) they are manipulating with some lines of code. Engineers should also be trained thoroughly in the many aspects.

Unfortunately there is quite often little budget for comprehensive training in several aspects. Ask your management for more training - better:more hands-on training!!

Thursday, November 15, 2018

IEC 61850 Seminar in INDIA CHENNAI 19 Nov, VADODARA 21 NOV

Dear All,

Please note the invitation to a great Seminar by Andrea Bonetti in INDIA
- CHENNAI 19 Nov
- VADODARA 21 NOV

Click HERE for details.

Monday, February 5, 2018

FMTP, NettedAutomation and other Experts Offer New Training Courses for Power System Automation, Protection, Smart Grid, and Security

FMTP Power AB (Uppsala, Sweden), KTH (Royal Institute of Technology Stockholm), Håvard Storås (Security expert), and NettedAutomation GmbH (Karlsruhe, Germany) have each long-term experience in the application of standards for protection and control as well in secure communication and SCADA applications.
FMTP and NettedAutomation in coopration with other senior experts offer the most comprehensive and vendor-independent education and practical training courses – they combine their knowledge and practical experience in the following areas:
  1. Substation control and protection, system design, engineering, and testing
    (Mr Andrea Bonetti who worked for ABB, Megger, and STRI),
  2. Smart Grid (Mr Lars Nordström, Director and Professor at KTH – Royal Institute of Technology Stockholm), 
  3. IT, OT & Cyber Security
    (Expert Mr Håvard Storås) and 
  4. Communication technology and SCADA ... market penetration and solutions(Mr Karlheinz Schwarz who worked for Siemens in the 80s and 90s):
We offer the following comprehensive training options:

Stockholm/Sweden
(English: Andrea Bonetti, Prof. Lars Nordström, 
Håvard Storås, and Karlheinz Schwarz): 

12-16 March 2018 (book 3, 4 or 5 days)

Click HERE for details

Karlsruhe/Germany
(English: Andrea Bonetti, Håvard Storås, and Karlheinz Schwarz):

23-27 April 2018 (book 3, 4 or 5 days)

Click HERE for details

Karlsruhe
(Deutsch: Karlheinz Schwarz):


14-17 Mai 2018

04-07 Dezember 2018

HIER für Details in Deutsch klicken.

Monday, November 13, 2017

IEC 61850 Training in Deutsch mit Jubiläumsrabatt

An alle an IEC 61850 Interessierten,
NettedAutomation bietet das viertägige IEC 61850 Intensiv-Training
vom 05 bis 08. Dezember 2017 
in Karlsruhe
zu einem ***unschlagbaren Jubiläums-Sonderpreis*** von 750 Euro (netto) an!

Hier für das Anmeldeformular klicken.

Bei der Anmeldung bitte den Sonderpreis vermerken!

Weitere Termine:
14.-17. Mai 2018
04.-07. Dezember 2018

Wir haben mehr als 4.300 Experten in mehr als 240 Kursen geschult - überall auf der Welt!

Wir bieten Ihnen auch gerne ein Inhouse-Seminar an.

Wir würden uns freuen, Sie am 05.12. in Karlsruhe - direkt neben dem Weihnachtsmarkt - begrüßen zu können!

Saturday, September 16, 2017

IEC 61850: Training for Protection, Control, and SCADA experts

FMTP and NettedAutomation offer one of the most wanted

Training for Protection, Control, and SCADA based on systems according to IEC 61850
:

10.-13. October 2017
Karlsruhe/Germany (just one hour south of Frankfurt International Airport)

We have a few seats available - one for you and maybe one for your colleague.

Click HERE for details and registration information.
Click HERE for further training opportunities.

Monday, September 4, 2017

LIMA/PERU: PROTECCIÓN, CONTROL Y AUTOMATIZACIÓN CON LA NORMA IEC-61850

NAKAMA SOLUCIONES S.A.C., FMTP, and NettedAutomation conduct a 5 days course on

PROTECCIÓN, CONTROL Y AUTOMATIZACIÓN CON LA NORMA IEC-61850


in Lima (Peru), NM Lima Hotel, Av. Pardo y Aliaga N° 330, San Isidro 15073

Del 13 al 17 de Noviembre del 2017

Horario: De 09:00 a 17:00 horas

Click HERE for general information.
Click HERE for the full program.

Friday, August 18, 2017

Drei IEC-61850-Hands-On-Trainingskurse in Deutsch in Karlsruhe (2017 und 2018)

Die NettedAutomation GmbH (Karlsruhe) bietet drei Termine für das aktuelle IEC61850-Hands-On-Training in Karlsruhe an:
05.-08. Dezember 2017 
14.-17. Mai 2018
04.-07. Dezember 2018

Diese unschlagbar günstigen Trainingskurse vermitteln über 30 Jahre Erfahrungen mit Informationsaustausch-Systemen basierend auf internationalen Normenreihen wir IEC 61850 (allgemeine Anwendungen in der Energietechnik, Schaltanlagen, Transport- und Verteilnetze, Wasserkraft, Kraft-Wärmekopplung, Speicher, ...), IEC 61400-25 (Wind), IEC 60870-5-10x (traditionelle Fernwirktechnik), IEC 61158 (Feldbus), IEC 62351 (Sicherheit in der Informationstechnik) und vielen anderen.

Planen Sie schon heute das entsprechende Budget für das Jahr 2018!

Clicken Sie HIER für Inhalte, Preise und Anmeldeinformationen.